architecture, Tips for a maximum wall paint workmanship, house, finishing, paint, wall, architect, idea, concept, home, design, designed, designing, room, interior, exterior

Tips for a maximum wall paint workmanship

Tips for a maximum wall paint workmanship. The most popular coating material is paint. The application is easy to be one of the reasons this material is popular. However, not many people know how the right application.

architecture, Tips for a maximum wall paint workmanship, house, finishing, paint, wall, architect, idea, concept, home, design, designed, designing, room, interior, exterior

Here is a guide you can learn before you start painting.

Moisture and Alkali

One of the most important things in the painting is a medium moisture. If the moisture content is too high, meaning that alkali salts that exist in the media to be painted too high. It is not good for the paint.

Humidity is good for painting is below 20%. Humidity and high levels of alkaline salts is caused by polishing or stucco that has not yet dried. In addition, it may also occur because the walls are permeable and high humidity chamber.

If the high alkali content, you must use basic paint that is resistant to alkali before painting. That way, an alkaline compound will not be connected with the paint so that the paint strong glue.

Other reference for you:

  Tips Tropical interior house design

Water flow

This relates to the moisture in the walls. If the walls were damp, check for leaks in the water flow. In addition, there is the possibility of hairline cracks in the wall there.

You must patch the wall before starting to paint. Use cement filler and waterproof coating to patch it.

Old Wall Repair

Old wall painting is more complicated than the new wall painting. Conditions old damaged wall must be repaired to prevent the problem in the new coat of paint.

The surface of the wall, such as plastering and polishing, should be in good shape. For maximum results, the old paint should be scraped and do gloss over.

Scrape

This is ideally done on the old wall to be painted. The aim is that the paint can be attached perfectly. However, if the old paint is not problematic, scrape not absolute implemented.

Mushrooms and moss

Not only peeling paint, you also have to clean off the mildew and fungus. Mosses and fungi can reduce the adhesion of the new paint-coated. Cleaning can be done by scraping and spraying cleaning solution fungus.

Other reference for you:

  How to organize room in house

Painting process

If you have already verified the state of the wall is good, you can start painting. In the painting, the best way is to coat the walls with a thin layer of paint repeatedly. If you’re painting with a thick layer, it is possible to dry the paint layer will not be at the same time.

Additionally, if you intend to dilute the paint, do not add too much diluent. Paint quality will be reduced.

How you feel for this post?
Share your vote!
0
0
0
0
0
0
0
0
0
0